The 4 Elements That Makes Up A Personal Computer System

There are 4 elements that make up a personal computer system: the user, software, hardware and the electricity all working together for the whole system. Each of these elements is essential to the system itself.

The user is the person's who perform the task using the computer system. The nature of the task depends upon the application program or software that is needed to perform the task. The software that the user used requires certain hardware components to function properly.

The hardwares of the personal computer system are made up of its equipment that are usually connected (the computer, monitor, printer and so on). It is defined as hardwares because you can physically touch these components. The programs are called softwares since their function can only be used when the computer is turn ON. Software is a set of coded instructions that the computer uses in order to carry out the user's tasks.

The user can only use the computer when it is turned ON. Without any electrical power to run through the personal computer system, it will not function. The ability of the personal computer system to control its components is through a series of on / off signals.

Here is how it works, when a user tries to type a document or a letter using his / her personal computer. The first thing the user do is to turn ON the power for the computer. Choosing a Word Processor software in order to write the document. The user uses the hardware such as the keyboard to write the content of the document; The typed document is then displayed onto the monitor screen. After the user finished writing his / her document. The user will use the software to instruct the printer to print the document. The software works together with the hardware components (the keyboard, monitor and printer) to accomplish the task that the user requested.

All of the four elements: the electrical power, hardware, software and the user work together to make up a personal computer system.

Posted in general | Comments Off on The 4 Elements That Makes Up A Personal Computer System

Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

10 Top Reasons Why I Have to Upgrade My Computer

The rate at which technology is improving is very fast and in the time you get comfortable with the computer hardware you have bought, several new and improved models appear in the market. While some people prefer to keep their computers state of the art, most of us have a 'If it is not broken, do not fix it' attitude when it comes to upgrading or replacing our computers.

This is a strategy that could prove expensive in the long run. It is always better to upgrade your computer on a regular basis, especially if you have had it for over 2-3 years. Even if your computer has had a large trouble-free existence, you really need to consider periodic upgrades and here are the reasons why you must dos so:

1. Increase in Processing Speed ​​- This is one place where you really get to notice an improvement in performance. If you are upgrading from a Celeron 433MHz processor to a Pentium 4 1.6GHz, you would really notice the difference in performance!

2. Faster Memory Access – Improvements in CPU speed are typically accommodated by improvements in the speed at which data transfer occurs between the CPU and RAM. This is another area that provides an improvement in performance.

3. Size and Capacity improvements – Technology drives a reduction in component size coupled with an increase in storage capacity. This means that a RAM card or hard disk of the similar size as the older ones in your computer could have double the capacity!

4. Software Compatibility – Many of the new software packages you may wish to use in order to improve your productivity or entertainment experience may not function well on you old computer. It is better to upgrade your computer to enjoy the benefits of new software fully.

5. Obsolescence of Hardware – As your hardware gets older; Getting a replacement will get more difficult once manufacturers start phasing out the production. With improvement in technology, the older hardware becomes cheaper initially and becomes expensive as supply dries up.

6. Technical Support Issues – Many manufacturers stop providing technical support for older components as they cease production. The older your computer gets, the harder it is to find help in fixing it when it malfunctions.

7. Development of New Hardware – New hardware products appear in the market frequently that revolutionize your computer experience and are based on newly developed technology. The chances of your old computer supporting new devices are very low.

8. Faster Devices – Your old computer may not be in a position to accommodate the speed at which the new devices communicate.

9. New, Fast Communication Protocols – You may not be able to implement new or faster communication protocols in your old computer because the hardware is unable to support them.

10. Operating System and File Format – Your old hardware may not be able to run newer operating systems and some of the file formats may not be supported.

Posted in general | Comments Off on 10 Top Reasons Why I Have to Upgrade My Computer

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

What Requirements Does a Dot Net Developer Need to Fulfill?

Microsoft Dot Net is a useful software development component. It provides tools and libraries to the software developers so that they can create Windows-based applications in a more efficient manner. A Dot Net developer is a software programmer who has specific skills using .Net to develop software and computer applications. For people who are in the midst of looking for developers for your projects, there are some areas you need to take note. You are advised to look for competent programmers who can really assist you to complete your tasks successfully.

First thing first, you need to be clear about the responsibilities of a .Net Developer before you start looking for suitable candidate. Seriously speaking, the programmer is required to:

• Work hand in hand with other software engineers and architects to develop a logical series of instructions referred to as programming code for the computer to communicate with the networks, applications and databases.

• Create new software applications to suit the business needs

• Modify, repair, test and enhance existing applications

After knowing what the developer is required to do, the next area we need to take into consideration is the academic qualification. In general, a programmer should have degree qualification in computer science, information technology or any related discipline. If the programmer is not a degree holder, you may take a look at his or her working experience. If the candidate has extensive experience dealing with .Net development tools, you can consider getting him or her in. Check with the candidate whether he or she is familiar with maintenance of ASP Applications, e-Commerce solution, online education and learning, social networking sites, corporate web applications, and so on.

At the same time, a good dot net developer must be competent in carrying out all the important tasks. It is a must for him or her to have the following skills in:

• Classic ASP

• Microsoft SQL 2000 / 2005

• MS Access

• JavaScript, XML, DHTML, AJAX and CSS

• VBScript and JScript

Frankly speaking, if the programmer does not have the above mentioned skills, most of the employers in the job market are not willing to hire him or her.

Besides the skills, we should also take serious consideration on the general qualities of the programmers. They should have qualities as follow:

• Good passion in work

Having great interest in work is important. The programmers should love and enjoy what they are doing.

• Good learning attitude

Learning is a continuous process. We can’t stop at certain stage. Good developers must have positive attitude in learning. They must always grab the opportunities to learn new technology so that good applications can be adapted.

• Some “intelligence”

Honestly speaking, intelligence is something very subjective. What I mean here is the “personality” of the person. Being a programmer, he or she must be smart and sensitive to respond to all changes. It is important for a programmer to be open-minded and willing to take new challenges from time to time.

Posted in general | Comments Off on What Requirements Does a Dot Net Developer Need to Fulfill?

Who Invented Dell Computers?

The invention and the history of the Dell computer is quite interesting. First of all, it was in 1984 when Michael Dell, a student at the University of Texas at Austin, created the company PC's Limited. He only had a starting capital of $ 1,000. So what he did was started working out of his dorm room to build personal computers made from stock components. These computers were to be IBM compatible because that was the standard at that time. If a computer were to function with various pieces of hardware, it needed to be IMB compatible.

It is when Michael Dell figured that selling computers directly to customers to determine customer need that he dropped out of college. His family then extended him the $ 300,000 in expansion capital that he needed to make his business take off.

A success

It was in 1985 that the Turbo PC was developed and it sold for less than $ 800. It contained an Intel 8088 processor that ran at 8 MHz, which is significantly slower than the computers that we use today. Computers today are running in gigahertz, which are hundreds and even thousands of times faster than the 8 MHz processor that Michael Dell was installing in his computers at the time. But the truth is that this was the best that could be done in 1985. The technology was developing.

But there was an aspect of PC's Limited that was unique from the rest and continues to be this way today. It is the fact that customers could order their computers rather than buy a computer that was already assembled. This allowed individuals to receive computers at lower prices than what they could get with their competitors. This definitely worked because PC's Limited grossed $ 73 million in its first year of trading.

The beginning of Dell

It was in 1988 that PC's Limited became Dell. Prior to that, the company already had 11 international operations occurring, so the company was quite large. There were on site services set up to compensate for the lack of businesses acting as service centers for Dell computers. It was in 1990 that Dell attempted to sell through club houses, but had very little success with this. So it is then that Dell went right back to its direct to customer sales.

In 1996, Dell started selling computers on its website. An individual could go onto the website and custom design their computer so that it would be built to their specifications. From there, it would be shipped to the customer's home. Financing was made available so that individuals would be able to acquire their computers easily.

In 1999, Dell became the largest personal computer seller when they took over Compaq computers. Their revenue topped $ 25 billion in 2002. Also in 2002, Dell started selling televisions and other electronic items. They now have Dell brand printers, LCD TVs, and much more. Because of the expansion beyond computers, Dell was changed to Dell Inc. In 2003.

It is amazing that this billion dollar company started in a dorm room with $ 1000 in starting capital. And Michael Dell has always stood by the principles of letting individuals have the capability to design their own machine. Although there are Dell computers now sold in various retail outlets, a person can still go to the website and design the machine of their dreams. And Dell also offers a lot of assistance for individuals needing help with their computers. They offer on-site services and so much more for the computer user so that they can have the best experience possible.

Posted in general | Comments Off on Who Invented Dell Computers?

Automated Real Estate Software – The New Trend in Investing

The value of real estate has appreciated in the last few years. It also shows great potential for growth. Hence, now might be the best time to look at an investment in property. However, if you’ve spoken to someone who already has his knees deep in real estate investing, you will realize that a lot of things are easier said than done.

It requires skill and experience to scour the market for high value properties.

Then comes landing good buyers.

Finally, there’s a humongous amount of paper work to handle.

This is where real estate investing softwares might lend a hand. They automate the entire process of real estate investing. If you would like to know more about such applications, here’s a low down on some of the common features they offer.

Lead generation –

At the click of a single button you are able to find a comprehensive list of buyers and sellers scattered across the country. The information elicited includes names and mail addresses of buyers, owners of properties, the type of property (bank owned, foreclosed, low and high equity, absentee owner etc.) and amount of cash paid.

Website creation –

Every business needs a website, especially if you do not have a physical location from which operate. Not all of us know the technicalities of writing HTML codes and designing a website. The real estate softwares can help you create targeted and user-friendly websites that you can use to showcase your business.

Direct mail generator –

Marketing is the soul of a real estate business. The more you network the more leads you can generate. The direct mail generator feature helps you setup a highly productive and efficient mailing system. You can send out emails, newsletters, posters and flyers.

There are a range of pre-made email templates you can use to send out messages to your leads. Autoresponders make sure you can keep in touch with sellers and buyers even when you are not physically present to answer their queries.

This feature is a highlight feature of most real estate software given that the savings in time and money are large.

Investing tips –

This is a section that most newbies can benefit from. Most applications include a resource library with info on the basic aspects of the trade. An open community of members can also give you an opportunity to interact and build your resource with real-time knowledge about making, building and closing a deal.

Diverse user base –

Modern-day automated real estate investing software applications cater to a varied group of investors. It includes those who buy, fix and flip properties. If you are a landlord, it can increase the convenience of managing your properties including finding tenants and repairing and renovating properties between subsequent deals. There are also features that rehabbers and builders of new constructions can use.

Contracts and paperwork –

Real estate investment also means a lot of paperwork. Most applications offer tools to generate contracts. Features such as auto-fill enable you to fill personal details into letters, contracts and other property-related documents. You can sign them online, and then email or fax them free of charge.

There is one thing – you need to be realistic. Real estate softwares are tools you can use to streamline your business. You should have a real estate business to start with and some basic know-how on investing.

Posted in general | Comments Off on Automated Real Estate Software – The New Trend in Investing

Understanding the Significance of Computer Hardware

We are living in an age that is highly influenced by technology. Most of the activities we need to do now are automatic or computerized. Of all the technological developments achieved in the recent past, one significant tool that got developed and which will certainly keep influencing our lives is the computer. You would agree that computers play a very basic role in our daily life, just like the television and the cell phone. We are already at a stage where life will be difficult without a computer. That makes it important to understand the way a computer works, and then be informed of what we should do if it stops working. The most important part of any computer is its hardware, in the absence of which it just can not function.

If you are really keen to assess what has gone wrong with your computer when it stops working, you should understand the working and constituents of its hardware. You should especially have solid knowledge about the computer hardware when you want to undertake its troubleshooting on your own. One important part of the hardware is the RAM memory of any computer. For running any program or application, any computer needs a RAM memory. Other than that, if the computer has a RAM with specifications that are not compatible with the programs it is expected to run, its operation will be slowed down and it would almost crawl. When choosing a computer, you need to ensure that its hardware is not outdated, otherwise you'll have to upgrade it in order to be able to use the intended program.

You must take certain basic precautions while handling the hardware of computers. The most essential precaution is to ensure that the power supply to your computer is switched off, else it could cause an electric shock. Then, before you touch any part within the computer, ensure that you are not carrying any electric charge by connecting to a grounded piece of metal or you may procure an anti-static mat or wrist band available in the market. While inspecting the hardware components, you should look for broken or damaged component, as these are most likely the reasons for the computer malfunction. If a component does not fit in the slot, you are probably trying to fit it in the incorrect slot.

Once you know the hardware employed in your computer and the role it plays in the functionality of your computer, you'll be in a position to undertake its troubleshooting when it malfunctions. Each piece of hardware contributes to the successful function of the computer. To a large extent, the working of a computer depends on the quality of its hardware, making it imperative to keep it in good condition.

Posted in general | Comments Off on Understanding the Significance of Computer Hardware

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

3 Main Causes of Kernel Errors

A kernel error is a failure in some code critical to Windows. If you have ever encountered a Blue Screen of Death (BSoD), then you have seen a kernel error. Windows is actually several layers of programs made to work together. You can think of Windows as if it were your body, with many pieces working together to make a whole, and, like your body, some parts of Windows are more important than others.

The kernel is the most important part of Windows. It includes critical programs to handle things like memory management and device drivers for the graphics card. These programs are like a body's heart and brain. If something in the kernel crashes, it will often cause all of Windows to crash.

Software Failures

Because there are a lot of programs in the kernel, there are many opportunities for bugs to appear. Although Microsoft does extensive testing to get rid of bugs, their testing facilities can not run through all the combinations that billions of computers use with Windows when some bugs get through.

However, many of the kernel failures are in device drivers written by companies that make hardware, not by Microsoft. Your graphics card, for example, probably uses a driver created by the video company. These companies often work with Microsoft to test their drivers, but having companies working together adds an additional layer of complexity.

Hardware Failures

A hardware failure can cause a kernel error. If your graphics card fails, it can send bad data to the graphics device driver, which then crashes, creating a kernel error. If your hard disk fails, it can corrupt files used by Windows and cause the programs that use those files to crash.

Registry Failures

Registry failures can cause kernel errors. The registry is a database of information that Windows uses to store information about programs. If the registry gets corrupt, the programs that use it can cause kernel errors.

Registry corruption can come from either software or hardware failures. Software corruption can come from a bug in one of the programs that writes information out to the registry. Or if you turn off your computer without doing a complete shutdown, the registry files may not get completely written to the disk. Hardware corruption can happen when the hard disk fails causing parts of the registry files to be lost. It's a good idea to do some research on kernel errors and other registry issues.

Posted in general | Comments Off on 3 Main Causes of Kernel Errors